SSMI - Retailers of Aichi elevating platforms, elevating work platforms, live line truckmounts, and insulated platforms Home Truck Mounts Self Propelled Parts & Accessories Contact Us

 

 

HEAD OFFICE
19 Ngapara Street
Alexandra, Otago
New Zealand

Phone: 64 (03) 440 2203
Fax: 64 (03) 440 2246
support@aichissmi.com

 

Aichi TZ-12A, TZ-16A & TZ-20A

With its TZ range, Aichi provides a solution that meets many requirements of the market. Whether used in the mounting of sound-absorbing walls or neon advertising, in tunnel construction, in film or TV productions or at events, the TZ-12A, TZ-16A, & TZ-20A will always accomplish great things!

 

Aichi TZ-12A  Aichi TZ-12A

 
 Model Number And Model Name
Model Number TZ-12A TZ-16A TZ-20A

Model Name

 

 Heavy Load Aerial Platform Heavy Load Aerial Platform Heavy Load Aerial Platform
 Work Platform
Max. Load 1,000kg 1,000kg 1,000kg
Max. Height 12.1m 15.7m 19.7m
Inside Dimensions
(W x D x H)		 1.67 x 3.70 x 1.10m 1.94 x 4.40 x 1.02m 1.94 x 4.40 x 1.02m

Rotation Angle

 

 360° 360° 360°
 Boom
Type 3 step simultaneous telescopic 3 step simultaneous telescopic 3 step simultaneous telescopic
Length 3.685 - 8.995m 4.340 - 12.320m 5.400 - 16.390m
Raising Angle -15° - 79° -15° - 79° -15° - 79°
Raising Speed 40s 45s 55s

Lowering Speed

 

 45s 45s 55s
 Turntable
Rotation Angle 360° 360° 360°

Rotation Speed

 

 1 r.p.m. 1 r.p.m. 75s per 360°
 Outrigger
Stretch Width 1.870 - 4.100m 1.870 - 4.100m 1.990 - 4.420m
Stroke 1.115m 1.115m 1.215m

Jack Stroke

 

 0.495m 0.645m 0.645m
 Safety Devices
  • Hydraulic circuit
    • Safety valve
    • Jack extension/retraction safety system
    • Boom extension/retraction safety system
    • Platform leveling system
  • Separate work range limiting system by independent sensing outrigger extension (AMCS)
  • Boom/platform interference prevention system
  • Boom/cabin interference prevention system
  • Voice warning system
  • Boom interlock system
  • Jack interlock system
  • Boom raising, lowering and rotation limiting system
  • Stop switch
  • Emergency pump
  • Lever guards
  • Foot pedal deadman control

 
 Other Operator Friendly Systems
  • Vertical linear movement
  • Linear movements on horizontal plane
  • Automatic platform stowing system
  • Engine start, stop switch
  • Automatic acceleration of the engine
  • Checking system before starting to work
  • Illumination on the control
  • Rotation lathe cover
  • Boom sweeper
  • Level gauge

 
 Standard Equipment
  • Jack bases
  • Tire choks

 
 Optional Equipment
  • Blinking lights on the outriggers
  • Lighting lamp at the platform
  • Save-energy type engine start/stop system
  • Automatic maneuvering system
  • Platform movement limiter
  • Control protection sheet

 
 Chassis

7.49 tons gvw

 
 Vehicle Diagrams

Aichi TZ-12A
Aichi TZ-12A

  1. The boom deflection is not taken into account on the above work range diagrams.
  2. The work range of the platform shown in the MIN, MID I and MID II work range diagrams varies corresponding to the extended length of each outrigger and the boom-rotated directions.
  3. The minimum boom angle varies corresponding to the boom-rotated directions. Because the minimum boom angle is automatically limited by the interference protection system to prevent the boom and the platform from interfering with the chassis cabin and the outriggers.
  4. The work range of the platform shown in the MIN, MID I, MID II diagrams is obtained when the boom is rotated to the right or left side center of the chassis. The work range of the platform equivalent to outrigger extension of MAX is always obtained when the boom is rotated to the front or rear range of the chassis.

Design © BWD
Content © SSMI		 All specfications, appearances and parts are subject to change without notice