SSMI - Retailers of Aichi elevating platforms, elevating work platforms, live line truckmounts, and insulated platforms

Home Truck Mounts Self Propelled Parts & Accessories Contact Us HEAD OFFICE 19 Ngapara Street Alexandra, Otago New Zealand Phone: 64 (03) 440 2203 Fax: 64 (03) 440 2246 support@aichissmi.com	Aichi SK-10B
	The SK-10B was developed for Telecommunication Line Construction, CATV Construction and Network Infra-Structure Construction. The SK-10B meets your needs with enhanced functions and options. click for a larger image
	Model Number And Model Name
	Model Number	SK-10B
	Model Name	Aerial Platform
	Bucket
	Loading Capacity	200kg (2 persons)
	Max. Bucket Floor Height	9.7m
	Max. Working Radius	7.4m
	Material	FRP
	Inner Dimension	1.0m x 0.7m x 0.9m (L x W x H)
	Swing Angle	Left 104°, Right 107°
	Insulated Rate	20kV (5 min.)
	Boom
	Type	3 stages, fully telescopic
	Length	3.08m ~ 7.07m
	Telescopic Strole	3.99m
	Extension/Retraction Speed	3.99m/20s
	Boom Angle	-16° to 80°
	Elevation Speed	-16° to 80° / 40 seconds (up/down)
	Rotation Angle	360° (continuous)
	Rotation Speed	1.0rpm
	Outrigger
	Outrigger Width	1624mm (front), 1517mm (rear)
	Jack Stroke	415mm (front), 360mm (rear)
	Safety Devices
	Hydraulic safety device Relief valve Pilot check valves on jack cylinders Holding valves on elevation and extension cylinders Bucket leveling system Jack-boom interlock system Stop switch Emergency pump Uppercontrol override switch Safety ring Deadman switch
	Other Devices
	Engine start/stop switch device (energy saving type) Automatic accelerator Automatic stop system of rotation at stowing position One stage toolbox (left and right) Leveling device Enable switch FRP coating of the third boom
	Standard Accessories
	Wooden jack base Wheel chock Standard tool set Earth stick
	Options
	Upper and lower working light Pre-programmed cabin toolbox avoidance system Tilt sensor Two stages toolbox (left and right) Ladder carrier Rubber jack base
	Mounting Chassis
	Max loading	500kg (depends on chassis)
	Chassis	2.0 ton class
	Vehicle Dimensions	Working Range

Design © BWD Content © SSMI	All specfications, appearances and parts are subject to change without notice