SSMI - Retailers of Aichi elevating platforms, elevating work platforms, live line truckmounts, and insulated platforms

Home Truck Mounts Self Propelled Parts & Accessories Contact Us HEAD OFFICE 19 Ngapara Street Alexandra, Otago New Zealand Phone: 64 (03) 440 2203 Fax: 64 (03) 440 2246 support@aichissmi.com	Aichi D-70A
	The D-70A features a sturdy body to withstand vigirous use, powerful torque to improve efficiency, and excellent maneuverability and safety.
	Model Number And Model Name
	Model Number	D-70A
	Model Name	Digger Derrick
	Lifting Specifications
	Max. Load	3.0ton
	Capacity	3.0ton x 4.6m
	Auger Range	190° from rear (95° to L & R)
	Work Range	0.80m - 11.70m
	Max. Lifting Height	14.15m
	Auger
	Work Radius	4.16m - 11.40m
	Max. Drilling Depth	5.2m
	Work Range	190° from rear (95° to L & R)
	Drilling Diameter	0.45m
	Torque Of Auger	725kgf-m
	Outrigger
	Extended Width	Front: 1,980mm - 3,950mm Rear: 1,980mm - 3,780mm
	Outrigger Stroke	Front: 980mm Rear: 900mm
	Jack Stroke	440mm
	Rotation Device
	Rotation Angle	360°
	Rotation Speed	2.5 r.p.m. (with pump at 2,000 r.p.m.)
	Boom
	Length	4.875m - 12.275m
	Angle	-20° to 81°
	Elevation Speed	Full stroke: 23s (raising), 26s (lowering), with pump at 2000 r.p.m.
	Extension Stroke	3.7m x 2
	Extension Speed	Full Stroke: 20s (extension), 24s (retraction), with pump at 2000 r.p.m.
	Winch
	Hook Speed	Up: 55m/min Down: 40m/min (pump at 2000 r.p.m.)
	Wire Rope	T7 x 7 + 6 x Fi(20) class B Ø10(mm)
	Number Of Wires	2
	Safety Devices
	Hydraulic circuit Hydraulic relief valve Holding valves on elevation and extension cylinders Auger over winding prevention device Winch over winding prevention device Parallel hook movement device Alarm horn Hook stopper Load meter Boom angle meter Auger holding device
	Other Devices
	Engine start and stop device Jack check valve guard Variable pole support horns Water tank with electric pump Hydraulic power outlet Tool case Work light Three step wire guard
	Standard Accessories
	Jack bases Tyre chocks Grounding wire wheel Sling rope wire Load lifting table
	Optional Accessories
	Auger setting pin Pole extractor Rear reflectors Partition boards Rock bit
	Grades
	STD L (Equipped with multi-operation lever) C (Equipped with oil cooler) LC (Equipped with multi-operation lever and oil cooler)
	Vehicle
	4.5ton class mounting chassis
	Vehicle Dimensions
	These dimensions may vary depending on the chassis
	Working Range Chart

	Rated Load Chart

Design © BWD Content © SSMI	All specfications, appearances and parts are subject to change without notice